View previous topic :: View next topic |
Author |
Message |
udp3074
Joined: 25 May 2015 Posts: 5 Location: Tx
|
Posted: Tue Jun 02, 2015 3:07 am Post subject: Cleaning Threshold Question |
|
|
Maybe you have received messages about this from tomato firmware users. The number 20 is in the "cleaning threshold 20 redirections" the only port that stays udp 3074 demonware from my PS3 and even after i turn off the ps3 even after i've changed the dhcp lease time to just 9 hours the port still remains but i don't understand what to do but i guess just clear the ports manually through the tomato GUI.. Just wondering if you received a question like this before, cause i'm not sure if the ps3 is to blame something i didn't setup right on the router. there are only 4 computers and 1 ps3 and 1 xbox 360 those are the only 2 consoles that ports remain. I appreciate some advice in order to troubleshoot it.
Thank you
Also what does the number 20 represent for the cleaning threshold if only 2 device(PS3,xbox360)) that really only upnp will recognize but doesn't clean it out. Is there a custom configuration to try or set the 20 to a lower number, i'd like to know if possible. |
|
Back to top |
|
 |
miniupnp Site Admin
Joined: 14 Apr 2007 Posts: 1587
|
Posted: Thu Jun 04, 2015 8:34 am Post subject: |
|
|
it means the cleaning only happens when the number of redirection reach 20.
How many redirections are set ? _________________ Main miniUPnP author.
https://miniupnp.tuxfamily.org/ |
|
Back to top |
|
 |
udp3074
Joined: 25 May 2015 Posts: 5 Location: Tx
|
Posted: Sat Jun 06, 2015 5:06 am Post subject: |
|
|
miniupnp wrote: | it means the cleaning only happens when the number of redirection reach 20.
How many redirections are set ? |
It just has the 20 i've never changed it. I need to mention that the ps3 and xbox 360 are the only consoles that appear to leave their port mappings in place for my router that has tomato by shibby v128 and they don't get cleaned up. however the pc and laptops seem to get cleared. |
|
Back to top |
|
 |
|