View previous topic :: View next topic |
Author |
Message |
marshall84
Joined: 09 May 2015 Posts: 1
|
Posted: Sat May 09, 2015 6:31 pm Post subject: GetConnectionTypeInfo failed after upnpc -D |
|
|
Hi,
I was trying the -D command and after a
if type I get this:
Code: |
List of UPNP devices found on the network :
desc: http://192.168.0.10:50000/rootDesc.xml
st: upnp:rootdevice
UPnP device found. Is it an IGD ? : http://192.168.0.10:50000/
Trying to continue anyway
Local LAN ip address : 192.168.0.225
GetConnectionTypeInfo failed.
Status : Connected, uptime=1849296s, LastConnectionError : ERROR_NONE
Time started : Sat Apr 18 10:37:54 2015
GetLinkLayerMaxBitRates failed.
GetExternalIPAddress failed. (errorcode=401)
i protocol exPort->inAddr:inPort description remoteHost leaseTime
GetGenericPortMappingEntry() returned 401 (Invalid Action)
|
my router (192.168.0.1) is a Netgear DG834 and terminal is a Mac OS.
What I wrong?
Thank you |
|
Back to top |
|
|
miniupnp Site Admin
Joined: 14 Apr 2007 Posts: 1589
|
Posted: Wed May 13, 2015 8:06 am Post subject: |
|
|
obviously 192.168.0.10 is NOT your router.
Your router is not detected by miniupnpc.
Make sure UPNP is enabled and that it broadcast SSDP messages. _________________ Main miniUPnP author.
https://miniupnp.tuxfamily.org/ |
|
Back to top |
|
|
|