miniupnp.tuxfamily.org

[babut85]

judging by the forum settings, you are clearly not the person who can help :\ but w'll try anyway

[babut85]

ext_ifname=pppoe0
ext_perform_stun=yes
ext_stun_host=stun.sipgate.net
listening_ip=vport0
enable_natpmp=yes
enable_upnp=yes
secure_mode=no
system_uptime=yes
notify_interval=60
clean_ruleset_interval=600
anchor=miniupnpd
uuid=00000000-0000-0000-0000-000000000000
allow 1024-65535 192.168.85.0/0 1024-65535
---------------------------------------------------


miniupnpd[31745]: version 2.3.0 starting NAT-PMP/PCP UPnP-IGD ext if pppoe0 BOOTID=1667848346
miniupnpd[31745]: STUN: Performing with host=stun.sipgate.net and port=0 ...
miniupnpd[31745]: resolve_stun_host: stun.sipgate.net:3478 => 217.10.68.145:3478
miniupnpd[31745]: perform_stun: local ports 3751 46253 4061 16242
miniupnpd[31745]: wait_for_stun_responses: waiting 3 secs and 0 usecs
miniupnpd[31745]: wait_for_stun_responses: received responses: 1
miniupnpd[31745]: wait_for_stun_responses: waiting 3 secs and 0 usecs
miniupnpd[31745]: wait_for_stun_responses: select(): no more responses
miniupnpd[31745]: wait_for_stun_responses: waiting 3 secs and 0 usecs
miniupnpd[31745]: wait_for_stun_responses: select(): no more responses
miniupnpd[31745]: wait_for_stun_responses: waiting 3 secs and 0 usecs
miniupnpd[31745]: wait_for_stun_responses: select(): no more responses
miniupnpd[31745]: parse_stun_response: Type 0x0101, Length 68, Magic Cookie 2112a442
miniupnpd[31745]: parse_stun_response: MAPPED-ADDRESS 109.106.141.221:64758
miniupnpd[31745]: parse_stun_response: SOURCE-ADDRESS 217.10.68.145:3478
miniupnpd[31745]: parse_stun_response: CHANGED-ADDRESS 217.116.122.143:3479
miniupnpd[31745]: parse_stun_response: XOR-MAPPED-ADDRESS 109.106.141.221:64758
miniupnpd[31745]: parse_stun_response: SOFTWARE Vovida.org 0.96
miniupnpd[31745]: perform_stun: 1 response out of 4 received
miniupnpd[31745]: perform_stun: #0 external address or port changed
miniupnpd[31745]: STUN: ext interface pppoe0 with private IP address 172.25.231.96 is now behind restrictive or symmetric NAT with public IP address 109.106.141.221 which does not support port forwarding
miniupnpd[31745]: NAT on upstream router blocks incoming connections set by miniupnpd
miniupnpd[31745]: Turn off NAT on upstream router or change it to full-cone NAT 1:1 type
miniupnpd[31745]: Port forwarding is now disabled
miniupnpd[31745]: HTTP listening on port 29442
miniupnpd[31745]: Listening for NAT-PMP/PCP traffic on port 5351
miniupnpd[31745]: HTTP REQUEST from 192.168.85.23:57638 : GET /rootDesc.xml (HTTP/1.1)
miniupnpd[31745]: Host: 192.168.85.1:29442
miniupnpd[31745]: 200 rt_msg : msglen=200 version=5 type=14
miniupnpd[31745]: RTM_IFINFO: addrs=10 flags=8b43 index=4
miniupnpd[31745]: 200 rt_msg : msglen=200 version=5 type=14
miniupnpd[31745]: RTM_IFINFO: addrs=10 flags=8b43 index=4
miniupnpd[31745]: level=0 type=30
miniupnpd[31745]: sdl_index = 10 vport0:0.0.0.0.0.1
miniupnpd[31745]: ST: urn:schemas-upnp-org:device:InternetGatewayDevice:1 (ver=1)
miniupnpd[31745]: SSDP M-SEARCH from 192.168.85.23:58827 ST: urn:schemas-upnp-org:device:InternetGatewayDevice:1
miniupnpd[31745]: Single search found
miniupnpd[31745]: SendSSDPResponse(): 0 bytes to 192.168.85.23:58827 ST: HTTP/1.1 200 OK
CACHE-CONTROL: max-age=120
ST: urn:schemas-upnp-org:device:InternetGatewayDevice:1
USN: uuid:00000000-0000-0000-0000-000000000000::urn:schemas-upnp-org:device:InternetGatewayDevice:1
EXT:
SERVER: OpenBSD/7.2 UPnP/1.1 MiniUPnPd/2.3.0
LOCATION: http://192.168.85.1:29442/rootDesc.xml
OPT: "http://schemas.upnp.org/upnp/1/0/"; ns=01
01-NLS: 1667848346
BOOTID.UPNP.ORG: 1667848346
CONFIGID.UPNP.ORG: 1337
miniupnpd[31745]: HTTP REQUEST from 192.168.85.23:57640 : GET /rootDesc.xml (HTTP/1.1)
miniupnpd[31745]: Host: 192.168.85.1:29442
miniupnpd[31745]: HTTP REQUEST from 192.168.85.23:57641 : POST /ctl/IPConn (HTTP/1.1)
miniupnpd[31745]: Host: 192.168.85.1:29442
miniupnpd[31745]: SOAPAction: urn:schemas-upnp-org:service:WANIPConnection:1#GetStatusInfo
miniupnpd[31745]: HTTP REQUEST from 192.168.85.23:57642 : POST /ctl/IPConn (HTTP/1.1)
miniupnpd[31745]: Host: 192.168.85.1:29442
miniupnpd[31745]: SOAPAction: urn:schemas-upnp-org:service:WANIPConnection:1#GetExternalIPAddress
miniupnpd[31745]: HTTP REQUEST from 192.168.85.23:57643 : POST /ctl/IPConn (HTTP/1.1)
miniupnpd[31745]: Host: 192.168.85.1:29442
miniupnpd[31745]: SOAPAction: urn:schemas-upnp-org:service:WANIPConnection:1#GetExternalIPAddress
miniupnpd[31745]: HTTP REQUEST from 192.168.85.23:57644 : POST /ctl/IPConn (HTTP/1.1)
miniupnpd[31745]: Host: 192.168.85.1:29442
miniupnpd[31745]: SOAPAction: urn:schemas-upnp-org:service:WANIPConnection:1#AddPortMapping
miniupnpd[31745]: AddPortMapping: ext port 1111 to 192.168.85.23:1111 protocol UDP for: libminiupnpc leaseduration=0 rhost=
miniupnpd[31745]: UPnP permission rule 0 matched : port mapping accepted
miniupnpd[31745]: redirecting port 1111 to 192.168.85.23:1111 protocol UDP for: libminiupnpc
miniupnpd[31745]: Returning UPnPError 501: ActionFailed
---------------------------------------------------

upnpc-shared.exe -a 192.168.85.23 1111 1111 UDP
upnpc : miniupnpc library test client, version 2.2.3.
(c) 2005-2022 Thomas Bernard.
Go to http://miniupnp.free.fr/ or https://miniupnp.tuxfamily.org/
for more information.
List of UPNP devices found on the network :
desc: http://192.168.85.1:29442/rootDesc.xml
st: urn:schemas-upnp-org:device:InternetGatewayDevice:1

Found valid IGD : http://192.168.85.1:29442/ctl/IPConn
Local LAN ip address : 192.168.85.23
ExternalIPAddress = 109.106.141.221
AddPortMapping(1111, 1111, 192.168.85.23) failed with code 501 (Action Failed)
---------------------------------------------------

and for some reason, everyone in the obsd community doesn't give a shit that the only upnp daemon doesn't work two versions, or even more. yes, i tried version 2.3.1 and earlier. i tried different build options, but i didn't find a working combination.
ps: no rules are created in the anchor

[babut85]

syslog(LOG_INFO, "Reserved / private IP address %s on ext interface %s: Port forwarding is impossible", if_addr, ext_if_name);
syslog(LOG_INFO, "You are probably behind NAT, enable option ext_perform_stun=yes to detect public IP address");
syslog(LOG_INFO, "Or use ext_ip= / -o option to declare public IP address");
syslog(LOG_INFO, "Public IP address is required by UPnP/PCP/PMP protocols and clients do not work without it");
disable_port_forwarding = 1;
-------
are you mad? you would also enter a political reason here. i immediately realized when i was still registering on the forum that something was wrong with you. all that is required of such a program is to open ports, and not to talk about the structure of the world. other programs specially created for this purpose think about the structure of the world

[miniupnp]