Joined: 10 Oct 2008
|Posted: Fri Oct 10, 2008 11:53 pm Post subject: Run UPnP and NAT-PMP with different config setup
|Hello all. I am new to the forum but have an interesting feature request. To be as complete as possible, I will provide a little background to the scenario so please excuse my long first post
I have several computers on my LAN and one Playstation 3. I wanted to have the router respond to UPnP discovery ONLY from the PS3 static IP address. With the help of jchuit, the developer of Tarifa firmware, I was able to modify the UPnP_conf file to only allow requests from the PS3.
Now my problem is this: When you modify the upnp_conf file, it also affects NAT-PMP. What I would like to do is have UPnP respond to the PS3, and still allow NAT-PMP to be available to all PCs on my LAN. Unfortunately, at present it looks like the single upnp_conf file affects BOTH UPnP and NAT-PMP. I'd really like to be able to set different parameters for UPnP and NAT-PMP.
I realize that I may be asking for a bit much, but now that I have seen Paris, nothing else will do (as the saying goes.) If anyone is interested in my modification of the upnp_conf file, here is how I did it with Tarifa firmware on a Linksys WRT54G router.
Assume PS3 IP is 192.168.1.150
nvram set miniupnpd_conf='ext_ifname=vlan1
allow 1024-65535 192.168.1.150 1024-65535
deny 0-65535 0.0.0.0/0 0-65535
Thank you very much for your consideration.
-- Outer Marker